Es Selamun Aleykum ve Rahmetullahi ve Berakatuh

The technological boycott material we mentioned among our 2026 Goals is now ready for use.
The oppression against our Muslim brothers in Gaza and East Turkestan continues without slowing down.
Conscious and conscientious Muslims who share the grief of the Ummah want to help their brothers, but either nothing comes from their hands or they do not know what to do.
The greatest supports that can be done by everyone for now are prayers, donations, and boycott. Compared to the other two actions, boycott helps in a different way.
With a boycott, these issues are brought to the agenda and prevented from being forgotten, the society is made aware, financial support to the enemy is cut to reduce the harm, and in the long run, the enemy is worn out financially.
We are also trying to show our best effort in this field. For this reason, the first Boycott Materials we published was a highly effective tool to spread the boycott with its low cost, easy preparation, and practical applicability.
However, this tool, which can generally display a passive-active resistance, was not enough for us on its own. For this reason, we started to work on a different and more active boycott material. With the permission of ALLAH, this video inspired us to prepare this material. From here, we thank Bekir Develi for this beautiful action and ask our Lord to increase his reward and give him his goodness.

This time, our boycott material requires more technical knowledge compared to the previous material. Our goal was to design a device that produces high sound with the lowest possible cost and is difficult to turn off and destroy. For this reason, with its specially designed box, we designed a device that people who do not know cannot open or close, and warns about the boycott continuously from the moment it is turned on until its battery runs out. The device starts giving an audible warning from the moment it is turned on. However, there is a 1-minute delay button. Thus, you will have enough time to put the device in a suitable place and move away. Thanks to the turn-off and delay buttons being positioned in an inaccessible way, a person who does not know the device cannot turn it off. By coloring this device with the stickers from the previous Boycott Materials, you can engage in both an audible and visual action. Although this device is more complex and troublesome than the previous one, while people could ignore the previous material, especially on streets and avenues, they will not be able to ignore the high-volume warning of this device so easily. Like all our other services, you can access the models, documents, and files belonging to this material completely free of charge from the end of the text.

WARNING: You can print the outer casing design of the device from a 3D printer. If you do not own a 3D printer, you can get help from people providing 3D printing services. Additionally, people who do not want to bother can make the outer casing from any material they wish, but they must watch the assembly video and understand the design to learn what they need to pay attention to during the design phase. Because many details in the design, such as the holes of the speaker, the positions of the buttons, and the openings in front of them, have been carefully designed and are directed towards specific purposes. If you do not make the critical points of the design in accordance with the 3D model, you may not get the efficiency you expect from the device.

If you wish, you can watch the preparation steps from the assembly video.

Requirements:
- Soldering Iron
- Solder Wire
- Soldering Paste
- Jumper Cable Product Link
- ISD1820 Voice Recording and Playback Module Product Link
- - Detailed module video
- PAM8403 Mini Amplifier Circuit Product Link
- - Detailed module video
- C005 Delay Trigger and Timing Module Product Link
- - Detailed module video
- 220K 1/4W Resistor Product Link
- Speaker 4 ohm 3W 50mm Product Link
- Panel Type 3xAA Battery Holder Product Link
- 6x6x2mm Push Button Product Link
- 2 Position 3 Pin Slide Switch Product Link

Preparation Steps:
- We download and print the outer casing model.
- Then, we do the solderings in accordance with the Wiring Diagram.
- We place the system we prepared into the casing.

Usage:
- Turn on the device, then press the delay button.
- Place the device in a position you see fit and move away. The device will perform the operation after the specified time.

Additional Instructions:
- If you wish, you can stick the stickers from the Boycott Materials on the casing.
- If you want, instead of using the audio we provided, you can also record audio yourself.
- You can develop this project and all its materials as you wish, and share your innovations with us.
WARNING: Since the device is manufactured from cheap parts, it does not have a perfect voice quality. For this reason, we recommend that you ensure the audio to be recorded is very clean. You can send us your suggestions regarding the device through our communication channels.


Technological Boycott Materials Download Link:

• 3D Outer Casing Model
• Boycott Audio Recording (Bekir Develi) TR
• Boycott Audio Recording (Bekir Develi) EN
• Boycott Audio Recording (Bekir Develi) TR + EN
• Wiring Diagram TR
• Wiring Diagram EN

With the hope that it will lead to good things. We are waiting for your good prayers. InshaALLAH it has been beneficial.
Selamun aleykum.